Does anyone know if the shifters are compatible with other makes? I’m thinking of fitting a quick release wheel hub but would mean the shifter arms are too far away from the wheel. I can buy extensions / mods for other wheels, but can’t find any for the Cammus C12
1 Like
Interesting idea.
I am still waiting to receive my C12 so I can see what is possible as I please for QR too but I have exact same issue in my mind. the gap between the wheel and paddles plus the gap between the wheel and the buttons, As I use rotary encoders for TCS, ABS and Brake bias.
Even if we fix a mod for paddle distance how do you plan to reduce the buttons distance ?
Note: I already received my 14" wheel rim for truck sim use cases but I fear using the 6 screws method with discourage me from changing the wheel frequently even though I have electronic screw driver.
Hadn’t even thought of the distance to the buttons!!! 
Doh!!
1 Like
If you want to attach a quick release in front of the C12, you would need to use a wheel that have buttons and paddles by itself, a friend of mine did it and it works great, but you will need a wheel that has bluetooth or usb connection directly to your PC or to one of the USB-C ports behind the C12.
I am doing a new rim for mine but it wont have a QR, I will fix it flush with the base so I can still use the buttons and paddles.
1 Like
I’ve looked at the slim QRs but even then, they are 3.3cm deep, which is too much.
2 Likes
what kind of rim ? I have received GTR version and bought 14" rim for truck sim.
3 Likes
That rim looks amazing.
Wow you have quite a good setup. That diy button box and led.
I see you’re using simsonn pedals while I am using SimRuito pedals
Fans for wind sim too. Wow.
Amazing setup.
Thank you. Little secret…the rim is not expensive. I bought it from AliExpress! The fan is just there to keep me cool…it’s on a switch near the wheel so I can turn it on during races. I’ve also got a Simsonn shifter and hand brake. I’m now thinking about triple monitors but may not have the room! It looks a bit messy in this photo. I’ve tidied the cables a bit since then.
I did this actually. using the Kyostar QR
paddles are a bit far away, I can still reach (i have long fingers) but nothing some 3d printed custom paddle shifters can’t fix.
I’m building a custom rim for it, based on the Porsche 992 cup car:
I did the project to work on the C12 so the buttons will not be like the original, but at least it’s a quick change when it is finished
it’s 70% done
I will post the whole project here when i’ts ready, with all the files to 3D print and cut the rim
2 Likes
Thanks for posting some pics… That helps me a lot. I’ve seen some slimline QRs which I might look at… They’re no where near as deep as the Kyostar. I think I read the whole QR is about 2.4 cm
1 Like
Looking good! That’ll look perfect when you’ve finished building it!
1 Like
does anyone know how to dissemble the c5 to change my shifter connector
1 Like